Follow us on :
Phone : +39 0823 1545993
Mobile : +39 333 4156216
Via Santagata 73
Centro Direzionale Contemporanea
81055 Santa Maria C.V. (CE)
© 2020 Radio Controlli. VAT IT03939360610 All right reserved.
RC-SPC1KA is an thick film technology rain sensor. This device is realized in Allumina (AL2O3) substrate, this material is endowed a big reliability from an electrical thermal point of view. The sensor consists of three parts :
1) Capacitive sensor (Face A)
2) Heater generator (Face B)
3) Temperature Sensor (Face B)
The Face A is the sensitivity area (capacitiver sensor) this area is exposted to natural agent (rain); In dry condition the value of the capacitor is nominal 100pF.
In presence of the rain the capacitance goes to high valued respect the dry contidion;
The ratio changing is over 420%, in the table N.1 you can verify the capacitance change characteristics.
On Face B is present the heating circuit the temperature sensor (NTC component) and the connection interface (six pads).
On the rear of the rain sensor there is a temperature sensor NTC with a nominal resistence value 1Kohm (25°C), it’s possible use this sensor to monitor the environment temperature. It’s possible to control the heater against particolar environment condition as frost and dump. With these 3 functions : - Measure the capacitance (Table 1) - Measure the environment temperature (Table 2) - Heater control (Table 3) It’s possible establish if it's raining or not.
R Value (heater)
42 ohm ± 10%
1K ± 10%
Capacitive change characteristics
Watch the Video
You might be interested RC-SPC1Kversion.
Link to Buy Samples: